Online Practice Test Physics Chem sem 1
Online Practice Test Physics Chem sem 1, provides the students with the link to the pages where they can take the test. Mock online tests are important to give the students confidence that is required to face the main exam.
Basic Physics Online test Link
Test 1 Online Practice Test Physics Chem sem 1
Test 2 Online Practice Test Physics Chem sem 1
Test 3 Online Practice Test Physics Chem sem 1
Basic Chemistry online test Link
Test 1 Online Practice Test Physics Chem sem 1
Test 2 Online Practice Test Physics Chem sem 1
Test 3 Online Practice Test Physics Chem sem 1
Syllabus for Chemistry Online Practice Test Physics Chem sem 1
Unit Major Learning Outcomes Topics and Sub-topics (in cognitive domain) Physics
Unit – I
1a. Describe the concept of given
1.1 Unit, physical quantities: fundamental
Units and physical quantities with and derived quantities and their units Measurem relevant unit of measurement.
1.2 Systems of unit: CGS, MKS, FPS and ents 1b. Explain various systems of SI units and its need for the
1.3 Dimensions, dimensional formula measurement of the given 1.4 Errors, types of errors: instrumental, physical quantities. systematic and random error,
1c. Determine the dimensions of estimation of errors: absolute, relative the given physical quantities. and percentage error, significant
1d. State the error in the given figures measurement with justification.
Unit– II
2a. Calculate electric field,
2.1 Concept of charge, Coulomb's inverse Electricity, potential and potential square law, Electric field, Electric field Magnetism difference of the given static intensity, potential and potential and charge. difference Semicondu
2b. Describe the concept of
2.2 Magnetic field and magnetic field ctors given magnetic intensity and intensity and its units, magnetic lines flux with relevant units. of force, magnetic flux 2c. Explain the heating effect of
2.3 Electric current, Ohm's law, specific the given electric current. resistance, laws of series and parallel
2d. Apply laws of series and combination of resistance, heating parallel combination in the effecting of electric current given electric circuits.
2e. Distinguish the given
2.4 Conductors, Insulators and conductors, semiconductors Semiconductors, Energy bands, and insulators on the basis of intrinsic and extrinsic semiconductors energy bands.
2.5 p-n junction diode, I-V characteristics 2f. Explain the I-V of p-n junction, applications of p-n characteristics and junction diode applications of the given p-n junction diodes.
Unit– III
3a. Convert the given
3.1 Heat, temperature, temperature scales Heat and temperature in different
3.2 Modes of transfer of heat, good and bad Optics temperature scales. conductors of heat, law of thermal
3b. Describe the properties of the conductivity given good and bad 3.3 Boyle’s law, Charle’s law, Gay conductors of heat. Lussac’s law, perfect gas equation
3c. Relate the characteristics of 3.4 Specific heat of gas at constant pressure the three gas laws. and volume (Cp and CV), ratio of
3d. Determine the relation specific heats between specific heats for the given materials.
3e. Distinguish the phenomena 3.5 Reflection , refraction, laws of of total internal reflection for refraction, total internal reflection the given mediums.
3.6 Optical fiber: Principle, construction 3f. Describe light propagation in and path of light through optical fiber,
the given type of optical applications of optical fibers. fiber. Chemistry
Unit-IV
4a. Explain the properties of
4.1 Electronic theory of valency, chemical Chemical given material based on the bonds: types and characteristics, bonding bond formation. electrovalent bond, covalent bond, and
4b. Describe the molecular coordinate bond, hydrogen bond, Catalysis structure of given solid, metallic bond, metallic properties, liquid and gases. intermolecular force of attraction.
4c. Describe the crystalstructure
4.2 Molecular arrangement in solid, liquid of the given solids. and gases.
4d. Select the relevant catalyst
4.3 Structure of solids: crystalline and for given application. amorphous solid, properties of metallic solids-, unit cell- of simple cubic, body centre cubic, face centre cubic, hexagonal close pack crystals.
4.4 Catalysis: Types of catalysis, Catalyst, Types of Catalyst, Positive Catalyst, Negative Catalyst, Auto-catalyst, Catalytic Promoter and Catalytic inhibitor, Industrial Application of Catalyst
Unit –V
5a. Describe the phenomenon of
5.1 Corrosion: Types of corrosion- Dry Metal the given type of corrosion corrosion, Wet corrosion. Oxidation Corrosion, and its prevention. corrosion (Atmospheric corrosion due to its
5b. Identify the different factors oxygen gas), mechanism, Types of prevention affecting rate of corrosion for oxide film, Wet corrosion mechanism and the given type of material. (Hydrogen evolution in acidic medium) Electroche
5c. Select the protective
5.2 Concentration cell corrosion -oxygen mistry measures to prevent the absorption mechanism in neutral or corrosion in the given alkaline medium, Pitting corrosion, corrosive medium. Waterline corrosion, Crevice corrosion.
5.3 Factors affecting the rate of corrosion control: Modification of environment, Use of protective coatings- coating of less active metal like Tin (Tinning), coating of more active metal like Zinc (Galvanizing), Anodic and cathodic protection, Choice of material-using pure metal and using metal alloys
5d. Differentiate the salient
5.4 Electrolyte- strong and weak, Non- features of the given Electrolyte, Electrolytic cell, electrolytic cell and Electrochemical cell. Cathode, Anode, electrochemical cell. Electrode potential- oxidation and
5e. Distinguish the given reduction, Construction and working of primary and secondary Daniel cell Ionisation and dissociation electrolytic cells. 5.5 Faradays first and second law NITTTR Bhopal-MSBTE/I - Scheme/17 Page 7 of 12 Basic Science (common) Course Code: ................. Unit Major Learning Outcomes Topics and Sub-topics (in cognitive domain)
5f. Describe the process of
5.6 Primary cell and secondary cell electrolysis for the given Electrolysis- Mechanism, Electroplating electrolyte. and electro-refining of copper.
5g. Describe the process of electroplating of the given material.
Unit-VI
6a. Identify the ingredients of
6.1 Paints: Purpose of applying paint, Paints, the given paints. Characteristics of paints, Ingredients of Varnishes,
6b. Differentiate salient paints, Function and Examples of each Insulators, properties of the given paint ingredients Polymer, and varnish.
6.2 Varnish: Types, Difference between Adhesives 6c. Describe the properties of paints and varnishes and insulating materials for the
6.3 Insulators: Characteristics, Lubricants given application. Classification, Properties and Application of Glass wool, Thermo Cole
6d. Differentiate the given types
6.4 Polymer and Monomer, Classification: of structural polymers. on the basis of Molecular structure, on
6e. Describe the polymerization the basis of monomers (homo polymer process of the given polymer. and copolymer), on the basis of Thermal
6f. Explain the properties and behavior(Thermoplastics and uses of the given polymer, Thermosetting) elastomer and adhesive.
6.5 Types Polymerization Reaction,
6g. Describe the application of Addition Polymerization, Condensation relevant adhesives required Polymerization, Synthesis, properties for the given material. and application of Polyethylene,
6h. Explain the properties of Polyvinyl chloride, Teflon. Polystyrene, given type of lubricants. Phenol formaldehyde, Epoxy Resin
6.6 Adhesives: Characteristics, Classification and their uses 6.7 Lubricants: Classification, properties and applications
Link to Online Practice Test Physics Chem sem 1 is given above
Syllabus for physics Online Practice Test Physics Chem sem 1
Unit Major Learning Outcomes Topics and Sub-topics (in cognitive domain) Physics
Unit – I
1a. Describe the concept of given
1.1 Unit, physical quantities: fundamental Unit Major Learning Outcomes Topics and Sub-topics (in cognitive domain) Units and physical quantities with and derived quantities and their units Measurem relevant unit of measurement.
1.2 Systems of unit: CGS, MKS, FPS and ents 1b. Explain various systems of SI units and its need for the
1.3 Dimensions, dimensional formula measurement of the given
1.4 Errors, types of errors: instrumental, physical quantities. systematic and random error,
1c. Determine the dimensions of estimation of errors: absolute, relative the given physical quantities. and percentage error, significant 1d. State the error in the given figures measurement with justification.
Unit– II
2a. Calculate electric field,
2.1 Concept of charge, Coulomb's inverse Electricity, potential and potential square law, Electric field, Electric field Magnetism difference of the given static intensity, potential and potential and charge. difference Semicondu
2b. Describe the concept of
2.2 Magnetic field and magnetic field ctors given magnetic intensity and intensity and its units, magnetic lines flux with relevant units. of force, magnetic flux
2c. Explain the heating effect of 2.3 Electric current, Ohm's law, specific the given electric current. resistance, laws of series and parallel
2d. Apply laws of series and combination of resistance, heating parallel combination in the effecting of electric current given electric circuits.
2e. Distinguish the given
2.4 Conductors, Insulators and conductors, semiconductors Semiconductors, Energy bands, and insulators on the basis of intrinsic and extrinsic semiconductors energy bands.
2.5 p-n junction diode, I-V characteristics 2f. Explain the I-V of p-n junction, applications of p-n characteristics and junction diode applications of the given p-n junction diodes.
Unit– III
3a. Convert the given
3.1 Heat, temperature, temperature scales Heat and temperature in different
3.2 Modes of transfer of heat, good and bad Optics temperature scales. conductors of heat, law of thermal
3b. Describe the properties of the conductivity given good and bad
3.3 Boyle’s law, Charle’s law, Gay conductors of heat. Lussac’s law, perfect gas equation
3c. Relate the characteristics of
3.4 Specific heat of gas at constant pressure the three gas laws. and volume (Cp and CV), ratio of
3d. Determine the relation specific heats between specific heats for the given materials.
3e. Distinguish the phenomena 3.5 Reflection , refraction, laws of of total internal reflection for refraction, total internal reflection the given mediums.
3.6 Optical fiber: Principle, construction 3f. Describe light propagation in and path of light through optical fiber
Unit-IV 4a. Explain the properties of 4.1 Electronic theory of valency, chemical Chemical given material based on the bonds: types and characteristics, bonding bond formation. electrovalent bond, covalent bond, and
4b. Describe the molecular coordinate bond, hydrogen bond, Catalysis structure of given solid, metallic bond, metallic properties, liquid and gases. intermolecular force of attraction.
4c. Describe the crystalstructure 4.2 Molecular arrangement in solid, liquid of the given solids. and gases.
4d. Select the relevant catalyst 4.3 Structure of solids: crystalline and for given application. amorphous solid, properties of metallic solids-, unit cell- of simple cubic, body centre cubic, face centre cubic, hexagonal close pack crystals.
4.4 Catalysis: Types of catalysis, Catalyst, Types of Catalyst, Positive Catalyst, Negative Catalyst, Auto-catalyst, Catalytic Promoter and Catalytic inhibitor, Industrial Application of Catalyst
Unit –V 5a. Describe the phenomenon of
5.1 Corrosion: Types of corrosion- Dry Metal the given type of corrosion corrosion, Wet corrosion. Oxidation Corrosion, and its prevention. corrosion (Atmospheric corrosion due to its
5b. Identify the different factors oxygen gas), mechanism, Types of prevention affecting rate of corrosion for oxide film, Wet corrosion mechanism and the given type of material. (Hydrogen evolution in acidic medium) Electroche
5c. Select the protective
5.2 Concentration cell corrosion -oxygen mistry measures to prevent the absorption mechanism in neutral or corrosion in the given alkaline medium, Pitting corrosion, corrosive medium. Waterline corrosion, Crevice corrosion.
5.3 Factors affecting the rate of corrosion control: Modification of environment, Use of protective coatings- coating of less active metal like Tin (Tinning), coating of more active metal like Zinc (Galvanizing), Anodic and cathodic protection, Choice of material-using pure metal and using metal alloys
5d. Differentiate the salient
5.4 Electrolyte- strong and weak, Non- features of the given Electrolyte, Electrolytic cell, electrolytic cell and Electrochemical cell. Cathode, Anode, electrochemical cell. Electrode potential- oxidation and
5e. Distinguish the given reduction, Construction and working of primary and secondary Daniel cell Ionisation and dissociation electrolytic cells.
5.5 Faradays first and second law NITTTR Bhopal-MSBTE/I - Scheme/17 Page 7 of 12 Basic Science (common) Course Code: ................. Unit Major Learning Outcomes Topics and Sub-topics (in cognitive domain)
5f. Describe the process of
5.6 Primary cell and secondary cell electrolysis for the given Electrolysis- Mechanism, Electroplating electrolyte. and electro-refining of copper.
5g. Describe the process of electroplating of the given material. Unit-VI 6a. Identify the ingredients of 6.1 Paints: Purpose of applying paint, Paints, the given paints. Characteristics of paints, Ingredients of Varnishes,
6b. Differentiate salient paints, Function and Examples of each Insulators, properties of the given paint ingredients Polymer, and varnish. 6.2 Varnish: Types, Difference between Adhesives 6c. Describe the properties of paints and varnishes and insulating materials for the
6.3 Insulators: Characteristics, Lubricants given application. Classification, Properties and Application of Glass wool, Thermo Cole
6d. Differentiate the given types 6.4 Polymer and Monomer, Classification: of structural polymers. on the basis of Molecular structure, on
6e. Describe the polymerization the basis of monomers (homo polymer process of the given polymer. and copolymer), on the basis of Thermal 6f. Explain the properties and behavior(Thermoplastics and uses of the given polymer, Thermosetting) elastomer and adhesive.
6.5 Types Polymerization Reaction,
g. Describe the application of Addition Polymerization, Condensation relevant adhesives required Polymerization, Synthesis, properties for the given material. and application of Polyethylene,
6h. Explain the properties of Polyvinyl chloride, Teflon. Polystyrene, given type of lubricants. Phenol formaldehyde, Epoxy Resin
6.6 Adhesives: Characteristics, Classification and their uses
6.7 Lubricants: Classification, properties and applications
Online Practice Test Physics Chem sem 1 is availabel in the link above.
Students are advised to visit the above links for Online Practice Test Physics Chem sem 1.
Students are required to fill all the information as shown belos for Online Practice Test Physics Chem sem 1.
